...Used Eazyview to..inspect flue for corrosion. Flue readings high and I suspected internal flue connections on an extended flue to be corroded. Camera reach to first joins and picture clarity allowed us to see corroded flue leaking to inner air duct. Time saved 120 minutes. Without Eazyview - In this option I would have had to chisel flue from wall and dismantle for inspection. Had the flue not been faulty. This ran the risk of damaging the flue when removed and wasting time.

Mr S Young

...We have just bought a house in need of much renovation and upgrading. The plumbing heating and electrical systems are old and have been modified on a number of occasions. In order to start investigations a couple of weeks ago, I moved some furniture, lifted a carpet and cut a hatch in the floor to see how heating pipes ran. The result was inconclusive and needed another hatch. By the time I had replaced the hatches furniture and carpet, the job took about five hours from start to finish. On the day after I bought the camera I drilled a small hole to find out where the pipes ran to next and had the information I wanted in ten minutes. Camera paid for! An excellent investment, and I wish I had it years ago.

...Used 7-8 times, leaks under floor, used on flue jobs to check seals. Saved a couple of hours on each

...The Eazyview has made  a huge difference to my working practices.  When checking pipework to ensure the correct jointing etc. I am able to see difficult areas within a boat which would otherwise be inaccessible.   As I am not allowed to remove panels etc, this would necessitate the customer either removing the offending panels whilst I am on site, or worse still, involve a revisit to verify the pipework.   Along with not disturbing the fabric of the boat, it has also proved  to be an extremely professional image portrayed to the customer as you are often able to determine facts that previously would have only been able to be established by use of a torch and mirror.   Along with the above I have been able to establish on numerous occasions the validity of fuel supply lines etc.  by use of the Eazyview camera.   As a Gas Safe registered engineer, I also used this piece of equipment to establish any flue joints within voids along with pipework size changes, under floor boards and within dot and dab plasterwork etc.   As a piece of technical equipment I would thoroughly endorse this product as not only being practical and resourceful but also portraying a thoroughly professional image to my customers.

...Used Eazyview for checking short flue runs without removing boxing (checking for joins) - 20 minutes saved routinely. Looking under floors without taking boards up looking for leaks - 1 hour reduction Condensate runs- without removing appliances or cupboards - routine saving of 20 minutes

...I just bought this and fell in love with it, every technician has to have one of these in your tool box

...I find this product useful primarily because of the small diameter coupled with the 90 degree mirror allowing access to closed sections through fixing points for engineering investigation and confirmation

...I drilled a small hole to find out where the pipes ran to next and had the information I wanted in ten minutes.   Camera paid for! - An excellent investment, and I wish I had it years ago

...Best thing I ever bought!

...We are a home retailer, selling and fitting kitchens, bathrooms, tiles and heating appliances i.e stoves of various manufacture. We use the camera for site surveys where access is limited to see what is behind the current fireplace, or up behind a lintel, under floor boards in bathrooms or through light fittings to trace leaks, any where that our customers do not want to disturb the fabric of the building. Impossible to do without the camera. The camera is easy to use and the picture quality is fabulous. Exactly what we need.

Val Juhasz Director Aquapol-Scotland

...We're professional damp surveyors, we are doing building inspections looking for dampness and part of this job we occasionally need to inspect cavities too. I have used the Eazyview camera twice so far and got the job done nicely. I found it very easy to use. The focusing ability of the unit is excellent.

...My experience with the camera was a call-out to a customer that had been trying in vain to get the bathroom company back that had remodelled their bathroom 6 months ago, the customer had water leaking through there ceiling into the kitchen below. So without being able to remove anything in the bathroom I was able to make a few small holes in the plaster board below and managed to locate the exact offending fitting that was leaking. Minimising the liability and further damage to the ceiling I was able to cut a 6x6 hole and repair the joint.   So all things considered the camera paid for its self in the the very first job.   I keep it as part of my everyday tool kit and have since found several uses for it, even as recently retrieving a long lost engagement ring that had fallen down the back of a couch.

...I found that it is great for cylinder wall inspections as well as pistons and valves. Great for taking pictures and videos even locating the occasional lost small socket or bit

...Used Eazyview for ideal Classic vertical flue identified break in inner flue, looking under chip board floor for a leaking pipe. Behind kitchen units looking for a leak. Prevented lifting unnecessary flooring thus saved a couple of hours per job Without Eazyview -  lifted flooring.

Z Cebula Installations Manager A Bell & Company Ltd, Northampton

...We are a home retailer fitting kitchens, bathrooms - We use the camera for site surveys where access is limited to see what is behind the current fireplace, or up behind a lintel, under floor boards in bathrooms - Exactly what we need.

...Over the years we have used an array of expensive products and equipment. I have spent thousands on expensive equipment that lasts no time and with very poor results. My first purchase of an Easyview camera impressed me. I now have five Easyview units on fleet and purchased the 30m drain cam. What a great bit of kit! Well recommended.

Val Juhasz Director Aquapol Scotland

...We're professional damp surveyors, we are doing building inspections looking for dampness and part of this job we occasionally need to inspect cavities too. I have used the Eazyview camera twice so far and got the job done nicely. I found it very easy to use, and having built-in memory is very handy, it is usable right out of the box without the need for an SD card. Recording images and videos is at a click of a button, however I wish the image resolution would be higher, but overall it gets the job done nicely. It uses 3 standard AA type of batteries, it is recommended the use of good quality rechargeable batteries to last longer. The focusing ability of the unit is excellent, you can take clear pictures as close as 1 inch, and it also come with some handy accessories like a 90 degree mirror to be able to inspect perpendicularly.

...Used Eazyview to check behind fire. Check rear of Ultramax heat exchanger. Checking a flue joint on a boiler Looking for water leak, somewhere on system. This was found under a bath.  It prevented the floor being lifted. Saved at least 2 hours labour

...The Eazyview has made a huge difference to my working practices.  When checking pipework to ensure the correct jointing etc. I am able to see difficult areas within a boat which would otherwise be inaccessible...I have been able to establish on numerous occasions the validity of fuel supply lines etc.  by use of the Eazyview camera. As a piece of technical equipment I would thoroughly endorse this product as not only being practical and resourceful but also portraying a thoroughly professional image to my customers.

...This is the cats meow that everyone should get - it is one of those tools that pays for itself the first time and every other time.

Rob Davies Senior Engineer Toyota Manufacturing UK

...I find this product useful primarily because of the small diameter coupled with the 90 degree mirror allowing access to closed sections through fixing points for engineering investigation and confirmation

...Eazyview traced leak on Heat exchanger.  Cost of guessology on parts and extra labour cost if double handed was required. Indentified the correct part. Saved parts costs. Used it on a heat exchanger job where he could not trace the leak, the Eazyview camera was very useful with a clear picture which helped identify the problem.

...Titan Insulation North Ltd specialises in the removal of old and defective cavity wall insulation products. It is extremely important to ensure the products are removed and to collate photographic and video evidence for the customer. Over the years we have used an array of expensive products and equipment to achieve this. As you can imagine putting small cameras into a cavity wall and taking both photos and videos in all weathers is very tasking and trying on the equipment. I have spent thousands on expensive equipment that lasts no time and with very poor results. My first purchase of an Easyview camera impressed me, so much so that I purchased another two. Following my visit to the Trafford Tool Fair this year I met up with the Easyview team and purchased the 30m drain cam, What a great bit of kit! I now have five  Easyview units on fleet and I can get spares on next day delivery if needed as my lads are not light handed when using equipment! What a great bit of kit! Well recommended.

...Used Eazyview numerous times to see under floors and ceilings. Also used to see the continuity of a flue. Pictures enclosed.  Used to pin point source of problem.  Leak or route of pipe work.  Used a hole behind a smoke alarm to see into ceiling to see source of damp. Then replaced alarm after without any visible damage. The flue job. We was able to see the actual break in the inner seal so we knew which part/seal to replace to save us replacing the whole flue. Also used to see the continuity of a flue.  The landing pipe work job was a leak through ceiling from under a tiled bathroom floor. The camera let us see the route of the pipes and were able to re-pipe from the landing without disturbing the tiles. Saving big cost/damage to property.

...Used Eazyview for looking for leaks under floors, checked blind spots in boilers with a saving on each job We've used the camera a few times very successfully. Found water leak under floor upstairs by lifting one board in general area and looking around. Saved time moving furniture unnecessarily and accessing directly the leak. Located leak on back of boiler saved time removing boiler as part was obsolete and we wouldn't have known without taking it off the wall. Found leak on inside of heat ex on ideal condensing boiler where we wouldn't have been able to locate without isolating boiler from heating thus saving time and extra visits. Myself and the lads who've used it rate it highly.  Great bit of kit.

.....was able to make a few small holes in the plaster board below and managed to locate the exact offending fitting that was leaking. Minimising the liability and further damage to the ceiling I was able to cut a 6x6 hole and repair the joint. So all things considered the camera paid for its self in the the very first job.

...I was walking through the pits at the drag races the crew was using the same one I bought. This told me that it was probably the best one I could have purchased!

...Looking for a leak behind ornate skirting boards, identified the leak and saved massive property damage, saved 1/2 a days labour

...The best in my opinion. The 5.5mm camera head is perfect for viewing inside of engine cylinders, the longer/stiffer camera lead makes it optimal for diesel and heavy equipment work

...I needed a device that is small and it is capable of allowing me and my co-workers to look behind walls without putting creating enormous holes or causing too much damage while surveying a route to install network cable. I also needed a device that had a light attached to the end that is long enough for us to see in the dark. I've search local retailers and looked online for months without any good results. Some were either too big or too bulky to use or store until I found "EasyView Pro". This is a remarkable tool I have been looking for years. It’s small, compact and easy to use and best of all it has its own storage case. After using it for a few months it has saved us time and money compared to using other devices or tools that were ineffective. We think that one of the best features is having the ability of saving a picture of problem we had by saving it on a SD card. We saved several pictures on it of a potential problem we ran into and were able to view it on our tablet. After a few minutes we were able to arrive at an solutions on how to run a cable run around a junction box that was blocking our access to the network room. Saving pictures on a SD card on viewing on a larger screen is a valuable asset of the EasyView to view it on a tablet or portable laptop to solve a problem or sharing data with other coworkers or supervisor. The EasyView has saved us a lot of time and money to accomplish work faster and easier than before. I've even taken it home to solve a water leak behind the drywall in our ceiling and I’ve used it to find out how annoying critters are getting into my house from the outside and causing damage to my electrical wires in the den.

...Found water leak under floor upstairs by lifting one board in general area and looking around. Saved time moving furniture unnecessarily and accessing directly the leak. Great bit of kit

...Used Eazyview on a job last week and it saved at least two hours. Every time I use Eazyview it saves me time

...Used Eazyview today to check a pipe run through a small space in a loft, to make sure there were no bleeds or balancing valves causing a restriction. 1hrs labour and no making good to do for the customer Without Eazyview - Spent a lot of time accessing pipe work , which would have caused damage to ducting etc

...Overall I have to say I was impressed with your equipment and feel that it is real value for money.  I was going to re-sell it after I had finished but I now feel that it is well worth keeping and I am looking forward to the new accessories becoming available.  I feel that the camera will enable me to generate more work as I will be able to diagnose problems accurately.

...Used Eazyview for trace and repair. Found water leak under floor boards saving taking out a excessive amounts of furniture and time- 2 hours saved. Without Eazyview - All the furniture would have had to been moved and floor boards lifted to find the leak

...Check for water leak, Eazyview camera was used to identify water leak from Cylinder. Leak appeared downstairs via ceiling. Being able to check rear of cylinder fitted against wall saved having to remove it and investigate further.  Approx 180 minutes saved. Without Eazyview - Removal of cylinder to check numerous pipes that run behind it. Refitting of cylinder if not cause of leak.

...I used Eazyview on....various water leaks, under floors, in ceilings and pipe voids, saved a minimum of an hour per job